Technical data & Specification

Colour         : Grey/White

Pot life        : 30 minutes

Bulk density : 1.5

PH              : Alkaline

Coverage    : 2-3,sq feet/per kg on maximum

                   3mm thickness

Recommended ratio : 3parts of Mira bond to one

                                part of Clean water.

Colour         :  White

Pot life        : 60 minutes

PH               : Alkaline

Water Retentivity : 99.6%

Coverage   : 10sq feet/per kg, Depending on finish

                  of finish of the wall

Recommended ratio : 10-12 liter of Clean water

                       per 40kg bag

Colour  : White/Ivory

Pot life  :30minutes

PH : Alkaline

Coverage : Varies as per width & depth of joints

Recommended ratio : Add 3 to 3.5 parts of Mira

                     Tile grout to one part of clean  water

Category  : Alkyd and Synthetic resin based primers with Rust inhibitors such as a Zinc chrome

Application : Primer for metal,GI,wood and masonary surfaces confirming to highest specification

Coverage Etc., :8-10 Sq Mt Per It per Coat

Diluent   : MTO/GP Thinner

Category  : Alkyd and Synthetic resin based paint with

better heat resistance

Appliance : Metal surfaces, tranformer,lamp post and other GI surfaces with etching character

Coverage Etc., : 8-10Sq Per Mt Per coat

Diluent : Not required

Category    : Chlorinated Rubber based Paints

Application  : Road markin and for application to get corrosion and abrasion resistant substrate

Coverage Etc., : 8 to 10sq mt per It per coat

Diluent   : NC Thinner/Melamine/CR Thinner

Directions for use

Apply one or two coat of Mira PVL Remover(Paint, Varnish, Laquer)Liberally to the substrate, without thinning. Allow the old paint to soften. Remove the old paint Completely by scrapping.

Coverage  : Variable-substrate based

Diluent      : NC thinner